Technical New throttle body on old wiring, can anyone help?

[Mark polo]

Hi all, my throtle body went, so had new one Fitted.
Apparently the throttle body connector didn't fit the old wiring in my 60 plate.
So they put the old one back. It now doesn't run properly because the cpu is still configured to the old body. Has a yone resolved this problem?
Would really appreciate your help.
Regards Mark.

 

[Communicator]

If I remember correctly, the original throttle bodies were replaced by one from a different manufacturer. The change involved the use of an adapter cable. Perhaps this would be what you need?

 

[Kahcorp]

Your 2010 maybe 2009 built which I have found was the change in throttle bodies & wiring.
The third photo number 1 = ground, 2= 12v, 3= signal are for the new throttle body.

 

[RS3100]

If I remember correctly, the original throttle bodies were replaced by one from a different manufacturer. The change involved the use of an adapter cable. Perhaps this would be what you need?

Yes, I recall several years ago that the new throttle bodies were supplied by Fiat with the adapter cable if ordered for a van originally fitted with the old type.