Arc - I think it's going to be seperate as there wouldn't be much saving & the person receiving would have to repack the individual items to send on - hardly worth it !!
John
John
Technical New induction system for CC/SC 0.9/1.1/1.2
- Thread starter Yaninnya
- Start date
Currently reading:
Technical New induction system for CC/SC 0.9/1.1/1.2
- Status
okie kokie!
how does it work with banks and sending money to different countries, ive never had to deal with it before.
how would i do it? help!
i'm after a kit in red btw - what type of red is it, orangey or deep red?
how does it work with banks and sending money to different countries, ive never had to deal with it before.
how would i do it? help!
i'm after a kit in red btw - what type of red is it, orangey or deep red?
Last edited:
Yaninnya
New member
E-mail send. Oh, I forgot to ask you for your adress.minijohn said:
As I wrote in mail we can do it in just yellow because it is gellcoat dye not the paint. The colour is say similar to Broom Yellow but not exactly the same.minijohn said:
Last edited:
Yaninnya
New member
Of course I can't tell you how it is in England but in Poland I have't any problems at all with transvers to England in pounds. I just said what I want and bank done everything what I wanted.arc said:
It is more deep red but not dark. Very fresh colour. It is hard to state without examples.arc said:
project-cinqy
Member
I'm supposing that this would fit a punto 55 seeing as it's the same engine?
might have one later this month if it does?
Jon
might have one later this month if it does?
Jon
halifax charge £14 to send any ammount to any other country in europe... i dont know about other banks but they will charge you.
Yaninnya
New member
Me? Why? When I made transvers to England or Italy I paid cost of it (usually around 10 pounds).Bushboy said:
Yaninnya
New member
Of courst it will fit. For better results I advice to separate the air filter with flexible big bore pipe.project-cinqy said:
Of course, no problem at all.project-cinqy said:
just checking.. it does include the filter?
Yanninya - just checked with my bank (Barclays) , they want £20 to send bank to bank . I'm going to try the Post Office for an International Money Order .
OR
Do you have Western Union offices in Poland ??
John
OR
Do you have Western Union offices in Poland ??
John
arc said:
Hi Arc it`s just the induction kit bit,you fit whatever filter you like/got
Cheers
Adrian
ouch.. erm, delaying order due to complete lack of money!
My filter wouldnt fit that!
My filter wouldnt fit that!
Yaninnya
New member
No. The system is as it can be see on photos. The best air filters are K&N but also expencive. So we decided thet each customer can choose the filter which he want not we (producers of the system).arc said:
cleverdave
New member
- Joined
- Aug 8, 2004
- Messages
- 21
- Points
- 4
How much would it be just for the bob as the piping is useless to me as im still planning on using my bmc
Yaninnya
New member
The bob (I understand you called that the part which is fited directly over throttle body) costs 35,- pounds and fitting kit (studs, washers, nuts, clamps, etc.) costs 12,- pounds.cleverdave said:
Edit: But when you will change the lenght and diameter of whole inlet most pobably it will be working not as good as complete system.
Last edited:
Yanninya - I've just sent the money by Western Union . Looking forward to receiving the kit .
everyone else - Western Union just cost me £14 , so a group buy may well be worth while if only for sending the money in bulk .
John
everyone else - Western Union just cost me £14 , so a group buy may well be worth while if only for sending the money in bulk .
John
Yaninnya
New member
As I wrote you in email. It will be send soon.minijohn said:
Yanninya - ready to send yet ??
John
John
Yaninnya
New member
E-mail sent.minijohn said:
can you do different colours?
charlie
charlie
- Status
