Technical New Alloy Wheels

[Colin Edwards]

Hiya All,

I need to get new Alloys for My Multipla Y reg Mar 2001 1.9JTD, Do anyone know the full details of the wheel size. My Tyre sizes are 195/60 15, but I am not sure if i can I just buy 15" 6½J 4stud wheels.

Thanks

Colin Edwards

 

[avaconirl]

had a problem to get wheels to suit multipla beause of distance between studs got a set that suits 4 stud vw's with a set of studs that have a 'wobbily' coller to alow a good seating in stud hole make sure you get the right coller for the center to suit whell and hub

 

[Colin Edwards]

Thank you for your reply

 

[JTDman]

Im running 205/50/16 with no problems apart from a slight rub on the rear inner gaurds which were bent over and problem solved.

 

[Colin Edwards]

Thanks, but it is not so much the tyres that concern me it is the wheels. I am looking at a set of Gold Wheels on ebay the are 6½ J 15" with 108pdc but I am not sure what the pdc is on the multipla. The wheels on ebay came off a Corsa.
Regards
Colin

 

[multipete]

see "pcd and offset" you will need 98's for fiat multi

 

[avaconirl]

with the wobbily coller studs vw 4 stud wheels with a pcd of 100 can be used hope this helps as these are more common please remember that you have to get the right size coller for the hub. offset no is cast on the wheel maybe as 38 5 1/2 j or 6 j j nos refere to the width of wheel in this case 5 and a half or 6 inch wide the first no in this example 38 is allways the offset the no may be cast on the back or the front of wheel also printed ii manual.

 

[Colin Edwards]

Thanks for the replies this is more confusing than I first thought or perhaps it's me just being a bit dim. I would prefer the correct size wheels as I am driving to Austria next month for Xmas with the Family so having the correct wheels is very important to me.
Many Thanks
Colin