Abarth 695
New member
Hi, it's been while. Too busy with work and no computer at home makes things hard to keep posting stuff. So here's an update.
Car is in bits, I am replacing the wheel arches, the fiberglass ones were badly put on and the original arches not cut and welded as should be. So will need a few more of those. Plan will be to fit ones that can hold 12" or 13" wheels I am changing the look of the car to a modern racer look (if that's possible). Disks and wishbones with coil overs everywhere plus tripod shafts at the rear.
I could do with some advice on building a engine craddle and where to attach it to the car here are some pics.
Car is in bits, I am replacing the wheel arches, the fiberglass ones were badly put on and the original arches not cut and welded as should be. So will need a few more of those. Plan will be to fit ones that can hold 12" or 13" wheels I am changing the look of the car to a modern racer look (if that's possible). Disks and wishbones with coil overs everywhere plus tripod shafts at the rear.
I could do with some advice on building a engine craddle and where to attach it to the car here are some pics.