Technical Need HELP with installing angel eyes headlights

[aad4m]

Hello peeps,

I have bought some chrome angel eye headlights from ebay which did not come with any instructions besides my receipt.

i have a 2007(57 plate) fiat grande punto and i have fitted the headlights but need help wiring them up, i have looked all over the web and all over this forum and cant get the answers or instructions on how to install them correctly.

My headlight connectors are 7 pin which i have plugged into the angel eye headlight and the full/dip beams are working but there are also 2 white wires and two black wires coming out from the headlights. there is also another white and black wire coming out from the connector along with another wire which seems to have a little flat plastic thing which seems to connect into something.

Can some please help me this?

 

[bladecs_04]

the white and black cables are for the angel eye parts. i havent fitted them and im sure someone who has will be along soon.

but iirc you need to connect the white cables to the side lights and the black to the negative and this should light the angel eyes when your side lights are on.

 

[aad4m]

the white and black cables are for the angel eye parts. i havent fitted them and im sure someone who has will be along soon.

but iirc you need to connect the white cables to the side lights and the black to the negative and this should light the angel eyes when your side lights are on.

Thanks for your reply, i have managed to wire them up.

The two white and black wires that are coming fromt he headlight are for the led/xneons and halo and they connect to the white and black wire from the connector.

So the two black wires from headlight connect to the black wire from the connector, so three black wires should be connected together.

And the two white wires from the headlight again connect to the white wire from the connector, so three white wires connected together.

Thats it all working.

Theres another 3 wires with a small flat plastic chip coming out from the connector which doesnt need plugging into anything because my grande punto is a basic one however some models may need that wire plugging into something.

The Angel eyes that i bought from ebay must be of low quality because the halos can only be seen at night where as i thought they would be seen during day time too. Even at night the halos are less bright.

 

[ajtheclaret]

How did you connect the three black and white wires together pal?