Introduction
Picked up my Caribbean orange mjet today, so while it was nice today took some pictures.
Grande Punto My caribbean Orange Mjet.
- Thread starter S1M0
- Start date
you might as well replace the vinyl on the doors why your at it, Makes it allot tidier 
OP
OP
you might as well replace the vinyl on the doors why your at it, Makes it allot tidier
The drivers side is ok, but the passenger side is starting to come away so think i will be replacing that.
mine was worn scratch'd like hell. first thing i replaced then remembered about the front grill haha
have you got your C pillars back in now? I've took mine out... How did you split yours? and just wondering how I'm going to glue them back together if i decide to split...
Last edited:
OP
OP
mine was worn scratch'd like hell. first thing i replaced then remembered about the front grill haha
have you got your C pillars back in now? I've took mine out... How did you split yours? and just wondering how I'm going to glue them back together if i decide to split...
I just pulled them apart. I've got the top part back in just to see what it looks like but need some stronger glue to stick them back together (thinking something like no more nails).
ahh mine looks like its been plastic welded togetherh ahah
Never thought of no more nails.. I have a small DIY glue gun was going to try that...
Never thought of no more nails.. I have a small DIY glue gun was going to try that...
OP
OP
Yeah mine was, just pull really hard and they will come apart!
i took a flat head screw driver to it haha. just prized it open :') worked well actually!
OP
OP
Are you planning on doing the headlining as well?
I'm really undecided weather I want to attempt the headlining... I'm scared of it starting to sag!..
as earlier in your thread talking about the Abarth headlining would be an easier option for me...
but still really undecided!
the front A pillars I'm just going to spray black as I can't even see how to apply Material without creases!
OP
OP
Changed the hose from the turbo to intercooler today (thanks to matty seasider). Sure the original was leaking from both ends and does feel a lot better now.
OLD
NEW
OLD
NEW
Is that a reduced piping?
what size is it? looks like it says 40mm ...
what size is it? looks like it says 40mm ...
OP
OP
It's 48mm, just a straight swap.
OP
OP
Today i set about painting my callipers, they were looking a bit sorry for themselves. Still got the rears to do, prob get them done Fri.
BEFORE
AFTER
WHEELS FITTED
BEFORE
AFTER
WHEELS FITTED
Looks good dude. This is my next job on the list, what paint did u use?
Lovely job guessing there brushed?
I need to get around to painting mine really, I still have orange HT paint from my old fiat
guessing there brushed? I need to get around to painting mine really, I still have orange HT paint from my old fiat
OP
OP
Thanks, yeah just used a brush.
Gr3g This is the paint-
http://www.ebay.co.uk/itm/261027359...NX:IT&_trksid=p3984.m1439.l2649#ht_2639wt_689
Gr3g This is the paint-
http://www.ebay.co.uk/itm/261027359...NX:IT&_trksid=p3984.m1439.l2649#ht_2639wt_689
This post contains affiliate links which may earn a commission at no additional cost to you.
grantm616
New member
Looks really good mate! Some really nice work on the pillars and those callipers look brilliant, such a difference sets the wheels off now!
OP
OP
Looks really good mate! Some really nice work on the pillars and those callipers look brilliant, such a difference sets the wheels off now!
Thanks, still quite a bit to do yet though.
You coming stanford hall?
this sunday
this sunday
OP
OP
No mate I'm working, oh the joys of working weekends
