Technical Multipla 1.6 cylinder head

[xpecta]

Hi,

I have just completed a head rebuild due to a broken exhaust valve.
Head was a pig to get off due to the cylinder head bolts having what might be a Fiat only fitting:bang:, like a torx but wider on the tips, but now i need the torque figures for the new cylinder head bolts and I cannot find these anywhere.
It's the 2002 100 1596 engine
Anybody know what they should be?
Thaks
Vince

 

[pullitt73]

Hi,

I have just completed a head rebuild due to a broken exhaust valve.
Head was a pig to get off due to the cylinder head bolts having what might be a Fiat only fitting:bang:, like a torx but wider on the tips, but now i need the torque figures for the new cylinder head bolts and I cannot find these anywhere.
It's the 2002 100 1596 engine
Anybody know what they should be?
Thaks
Vince

hi vince torque settings should be 20nm then 40nm then 2x 90 degrees.there is a bolt sequence 8 6 2 5 10
7 3 1 4 9

the row which starts with 8 is exhaust manifold/baulkhead side and the tool you speak of is called ribe almost torx hope this helps