General mk1 cooling system

Currently reading:
General mk1 cooling system

casement60sx

New member
Joined
Jul 22, 2010
Messages
54
Points
21
Location
Billingham
i have just recently put in new radiator in it about2-3weeks ago i am wondering if the system will have to be bled after so long of putting a new rad in reply asap please as my temp guage got to just past the black point on half way mark then the fan kicked in is this high or normal?
 
Is same as my mk1 is normal and the car was in traffic. Definitively start worrying if 3/4 up.
 
Mine never had a temp gauge, it had a "light" which never had a bulb nore electronics for a bulb, so how would i know if mines overheating? I got a gauge now, but i CBA with the sensor just yet, as i hardly go far at all. Though when i do go what i call "far" usually around 20 miles or so, when i park up home the fans are going mental, so im gonna say yours sounds like mine? Could be wrong :/
 
Mine never had a temp gauge, it had a "light" which never had a bulb nore electronics for a bulb, so how would i know if mines overheating? I got a gauge now, but i CBA with the sensor just yet, as i hardly go far at all. Though when i do go what i call "far" usually around 20 miles or so, when i park up home the fans are going mental, so im gonna say yours sounds like mine? Could be wrong :/

Be Arsed. A temp guage is by a long way the best accessory for any car without one. If you're crawling around in traffic, expect the cooling fan to come on. If not, bleed and fit that sensor.
 
Which punto, of even fiat, am i meant to find this sensor? The sensor i got has only one pin which seems pretty useless, as im sure a sensor needs a live feed an earth and a signal connection!
 
genuine fiat, acquired it from a convertible :slayer:

i'd rather buy new, i know what the thread pitch and everything is, just not sure what the actual sensor looks like :s
 
Back
Top