Elxpunto90
Member
- Joined
- Mar 24, 2013
- Messages
- 271
- Points
- 53
I have tested coolant sensor and is working ok using a multimeter and saucepan to test resistance also have another sensor in engine when engine started up runs okay but when temp it at normal temp the sensors kick in the car starts to splutter and sounds like misfiring but doesn't stall and if you put foot in accelerator for 20 seconds at 2000 rpm then the injector light comes on and I notice there is a lot of soot around tail pipe seems to be running rich but If I disconnect the coolant sensor and connect the spare one up but not fitted to engine it runs smooth again because sensor thinks it cooler because it isn't in the engine I'm getting 5v on power and resistance is getting less when heating up any ideas please