General Lower radiator crossmember rusty - replacement part number ?

[WesleyPegden]

My vehicle is a 2005 Doblo 1.9 JTD MPV.

The crossmember that holds the intercooler and is lower mount for radiator, as well as ends of front bumper under wheel arches, is rusty on my car.

I'd like to replace this part with new but can't find a diagram which shows it so can't get a price nor parts number !

Question therefore can anyone either give me the part number or suggest where I can get access to a genuine type parts catalogue ?

Thanks.

 

[Davren]

ePER on the black bar at the top of this page is the Fiat parts catalogue.
.

 

[WesleyPegden]

ePER on the black bar at the top of this page is the Fiat parts catalogue.
.

Now found the part number. Thanks for help

 

[WesleyPegden]

Contacted Fiat main agent with part number only to find no longer available. Shocked however to be told last price they held showed part was over £300 !

 

[the green vanper]

Please post the part number, for further reference, and for anyone else to be able to find the part if available somewhere else than the dealership.

 

[WesleyPegden]

Please post the part number, for further reference, and for anyone else to be able to find the part if available somewhere else than the dealership.

Part number is 46812327 and is called a "cross rail". Some on internet but in Europe and work out still expensive when you take into account carriage.

 

[the green vanper]

TRAVERSA FIAT DOBLO 46812327 -

TRAVERSA FIAT DOBLO 46812327, ,, Ricambio originale, prezzo scontato ulteriormente dal nuovo cod. 46812327

www.ricambinuovi.com

77+29 EUR that seem to be a resonable price comparing to 300+ GBP at the dealer.

However I recommend checking on the company first.

 

[varesecrazy]

Contacted Fiat main agent with part number only to find no longer available. Shocked however to be told last price they held showed part was over £300 !

These formed metal parts have a hard life..

Is it potentially salvageable?

Fabricating something similar may be far more cost effective,

Looking at Galvanised extrusion..
Like electrical trunking, or "unistrut"

May give you some potential options

 

[WesleyPegden]

TRAVERSA FIAT DOBLO 46812327 -

TRAVERSA FIAT DOBLO 46812327, ,, Ricambio originale, prezzo scontato ulteriormente dal nuovo cod. 46812327

www.ricambinuovi.com

77+29 EUR that seem to be a resonable price comparing to 300+ GBP at the dealer.

However I recommend checking on the company first.

I set myself a limit of £75 that it'd be willing to pay based on such a small and simple part so whilst 106 Euro is a big saving it's still more than I'm prepared to pay !

 

[WesleyPegden]

These formed metal parts have a hard life..

Is it potentially salvageable?

Fabricating something similar may be far more cost effective,

Looking at Galvanised extrusion..
Like electrical trunking, or "unistrut"

May give you some potential options

Mine is more than savable. It's rusty rather than rotten and I can sandblast - but thought buying new, if sensible price (and available), would be the lazy way out I was also considering having a new part galvanised