General Kahn Aloy Wheels

[Clover_F]

How much is a set of 17" Kahn alloy wheels for coupe.


Clover
Fiat Coupe 20VT, Turbosmart TypeIII DV, Hybrid T28 (48mm compressor wheel), klon chip, Custom Stainless Steel intercooler piping, K&N filter element, 35mm B+G springs, Tarox G88, AP Lockhead Pads, 3" exhaust piping, cold air feed, Apex'i boost meter & turbo timer.

 

[SpunkyM]

Not sure, but you could give them a ring, get the number from their website on www.kahndesign.com

They are actually based half an hour down the road from me!

I'm sure that you don't need to tell me that the RSR or the RSS look absolutely awesome on the coupe. You will need spacers to clear those Brembos on the 20VT though <img src=icon_smile_sad.gif border=0 align=middle>

SpunkyM...
Fiat Coupe 20VT, Bailey DV, K&N panel, PBV @ 1.1bar.

 

[Clover_F]

Damn... i thought the kahn RSR or RSS could fit the coupe 20VT without any probs.... i saw the pic on Auto Italia magazine and it look sweet on the coop......
if only i could get a hold of a scanner... i wanna send you some pics of coop in Malaysia.... most of them are nicely mod

mostly the 16VT are mod like crazy here due to space availablity in the engine bay.....

at the moment we have 150 brand new units of the 20VT Plus unregistered and parked at the dealer.....

 

[SpunkyM]

That's one area where the 16VT has an advantage in that they don't have probs fitting aftermarket wheels as the don't have the front Brembos.

I'd love a set of 18" Kahn RSS on my 20VT but I hate the idea of spacers - it makes the wheels stick out too much and upsets the suspension geometry.



SpunkyM...
Fiat Coupe 20VT, Bailey DV, K&N panel, PBV @ 1.1bar.

Edited by - spunkym on 04/04/2002 09:12:52

 

[johns]

Try MiM Amalfi in 8.5x18 or so, as I think they will fit without spacers, and are the same as RSRs.

BTW I think you may need HUGE spacers for less than 8" wide Kahns, like 15mm or maybe more.
John S

 

[Luciano]

here is a coupe 20vt on 18 kahns

http://homepages.tesco.net/~s.northam/johns.htm

can contact him through coupe-sport.co.uk

hope this helps

 

[amjad]

Kahn are doing a special offer on Kahn RSR's for the Fiat Coupe at the moment. I called to see if they had stock. They are doing a really cheap deal on them in 17". Check them out at www.projectkahn.com

Originally posted by Clover_F
How much is a set of 17" Kahn alloy wheels for coupe.


Clover
Fiat Coupe 20VT, Turbosmart TypeIII DV, Hybrid T28 (48mm compressor wheel), klon chip, Custom Stainless Steel intercooler piping, K&N filter element, 35mm B+G springs, Tarox G88, AP Lockhead Pads, 3" exhaust piping, cold air feed, Apex'i boost meter & turbo timer.