General Kahn Aloy Wheels

Currently reading:
General Kahn Aloy Wheels

Clover_F

New member
Joined
Mar 31, 2002
Messages
14
Location
Malaysia.
How much is a set of 17" Kahn alloy wheels for coupe.


Clover
Fiat Coupe 20VT, Turbosmart TypeIII DV, Hybrid T28 (48mm compressor wheel), klon chip, Custom Stainless Steel intercooler piping, K&N filter element, 35mm B+G springs, Tarox G88, AP Lockhead Pads, 3" exhaust piping, cold air feed, Apex'i boost meter & turbo timer.
 

SpunkyM

New member
Joined
Mar 25, 2002
Messages
83
Location
Harrogate, United Kingdom.
Not sure, but you could give them a ring, get the number from their website on www.kahndesign.com

They are actually based half an hour down the road from me!

I'm sure that you don't need to tell me that the RSR or the RSS look absolutely awesome on the coupe. You will need spacers to clear those Brembos on the 20VT though <img src=icon_smile_sad.gif border=0 align=middle>

SpunkyM...
Fiat Coupe 20VT, Bailey DV, K&N panel, PBV @ 1.1bar.
 
OP
OP
C

Clover_F

New member
Joined
Mar 31, 2002
Messages
14
Location
Malaysia.
Damn... i thought the kahn RSR or RSS could fit the coupe 20VT without any probs.... i saw the pic on Auto Italia magazine and it look sweet on the coop......
if only i could get a hold of a scanner... i wanna send you some pics of coop in Malaysia.... most of them are nicely mod

mostly the 16VT are mod like crazy here due to space availablity in the engine bay.....

at the moment we have 150 brand new units of the 20VT Plus unregistered and parked at the dealer.....
 

SpunkyM

New member
Joined
Mar 25, 2002
Messages
83
Location
Harrogate, United Kingdom.
That's one area where the 16VT has an advantage in that they don't have probs fitting aftermarket wheels as the don't have the front Brembos.

I'd love a set of 18" Kahn RSS on my 20VT but I hate the idea of spacers - it makes the wheels stick out too much and upsets the suspension geometry.



SpunkyM...
Fiat Coupe 20VT, Bailey DV, K&N panel, PBV @ 1.1bar.

Edited by - spunkym on 04/04/2002 09:12:52
 

johns

New member
Joined
Mar 25, 2002
Messages
57
Location
United Kingdom.
Try MiM Amalfi in 8.5x18 or so, as I think they will fit without spacers, and are the same as RSRs.

BTW I think you may need HUGE spacers for less than 8" wide Kahns, like 15mm or maybe more.
John S
 

Luciano

New member
Joined
Jul 10, 2003
Messages
81
Location
United Kingdom.
here is a coupe 20vt on 18 kahns

http://homepages.tesco.net/~s.northam/johns.htm

can contact him through coupe-sport.co.uk

hope this helps
 

amjad

New member
Joined
Jan 7, 2004
Messages
1
Location
United Kingdom.
Kahn are doing a special offer on Kahn RSR's for the Fiat Coupe at the moment. I called to see if they had stock. They are doing a really cheap deal on them in 17". Check them out at www.projectkahn.com

Originally posted by Clover_F
How much is a set of 17" Kahn alloy wheels for coupe.


Clover
Fiat Coupe 20VT, Turbosmart TypeIII DV, Hybrid T28 (48mm compressor wheel), klon chip, Custom Stainless Steel intercooler piping, K&N filter element, 35mm B+G springs, Tarox G88, AP Lockhead Pads, 3" exhaust piping, cold air feed, Apex'i boost meter & turbo timer.
 
Top