Alan43
New member
Hi can anyone help I have the fault code697 and the van is in limp mode
- Model
- 2015 ducato
- Year
- 2015
- Mileage
- 40000
Technical Hi I need help I have fault code P697 and van is in limp mode
- Thread starter Alan43
- Start date
Currently reading:
Technical Hi I need help I have fault code P697 and van is in limp mode
It seems a sensor shorting to earth is the most likely cause and some have mentioned the DPF differential pressure sensor.
I know speaking to a retired Fiat MH mechanic that one of their most common problems was the DPF sensor.
No guarantee but may be worth checking.
Alan43
New member
Thanks will try this tomorrowIt seems a sensor shorting to earth is the most likely cause and some have mentioned the DPF differential pressure sensor.
I know speaking to a retired Fiat MH mechanic that one of their most common problems was the DPF sensor.
No guarantee but may be worth checking.
Alan43
New member
Hi ordered the new sensor from Amazon on Sunday night got it Tuesday midday £34.71 total including delivery
Was quoted £110.00 from Dingbro motor factors excluding vat also trade only so would have to get a garage to sell it to me.
Anyway got it and fitted in I/2 hour working a treat .
Just for a reference for anyone else Before fitting I tested it against the old one
Old on read pin 1-2 12.8 ohms 3-4 7.9 ohms
New one read 1-2. 1.7 ohms. 3-4. 1.6 ohms
Thank you so much for taking the time to give me the important information can now get away for a break cheers from Aberdeen
Good to hear. Mike
