Masterdiagnostik
New member
Hello from Ukraine.
Peace to you. I will be glad if you help me solve my problems with Fiat.
Peace to you. I will be glad if you help me solve my problems with Fiat.
Hello from Ukraine
- Thread starter Masterdiagnostik
- Start date
Currently reading:
Hello from Ukraine
Welcome. I'm sure we'll all help if we can What vehicle have you?
OP
OP
Masterdiagnostik
New member
Честно говоря. Peugeot 307. Занимаюсь диагностикой автомобилей. Временно в Литве. Клиент приехал к комупере. Фиат Дукато 244, 2,8 АКПП. Нашел много полезной информации на вашем сайте. Мне нужно установить круиз-контроль. Я это сделал, но, к сожалению, он не работает, ЭБУ двигателя считает, что сцепление выжато, и он работает только при скорости выше 80 км/ч. Затем устанавливается блок гидротрансформатора, и круиз работает.
Translation to English—To be honest. Peugeot 307. I'm engaged in car diagnostics. Temporarily in Lithuania. The client came to the comper. Fiat Ducato 244, 2.8 automatic transmission. Found a lot of useful information on your website. I need to install cruise control. I did it, but unfortunately it doesn't work, the engine ECU believes that the clutch is squeezed, and it only works at speeds above 80 km/h. Then the torque converter unit is installed, and the cruise works.
OP
OP
Masterdiagnostik
New member
Sorry! I wrote in English, pasted the text from the translator, but the page translated it automatically.
The Panda Nut
Nutty about Pandas Infected by Panda virus and OPD
Welcome. Friend!
The Panda Nut
Nutty about Pandas Infected by Panda virus and OPD
Are the wires correcly connnected on the clutch pedal switch or back to front. Just a thougt.
OP
OP
Masterdiagnostik
New member
I found a wire to the clutch switch, it is not connected to anything. Because the car has an automatic transmission. I connected it to the ground. But nothing changes, the engine ECU receives information from the automatic transmission via CAN, this data is from the torque converter.
