Fitting Sony to new Panda, what do I need?

Currently reading:
Fitting Sony to new Panda, what do I need?

gareth111278

Dazzed & Confused !
Joined
Nov 6, 2008
Messages
496
Points
124
Location
Near Barmouth N. Wales
Hello All

The old Cinq. is going for scrap & we're picking up a new 59 plate Panda on Monday.
The cinq has a nice sony with Bluetooth & USB so I'm planning to fit it to the Panda.
I know I'll need a Facia adaptor, are they all much of a muchness? , or can someone recomend a good supplier?
Will i need a cable adaptor for the ISO connectors on the Sony or is the Panda wired for ISO?
How hard is it to pull the factory radio, do I need special tools?
Any other problems or pitfalls?
Any advice would be VERY welcome

Cheers,:) Gareth
 
Fitting the HU will be pretty much the same principle as the cinq. Im not sure about the panda but for most fiat models the Autoleads fascia is pants so i would get it from fiat to be on the safe side.
 
when you take out the old HU, you will need a LONG allen key to remove the cage, there is a bolt way down deep and you might want to use a ring spanner to get the swine to turn.


Trev
 
Back
Top