Styling Fitted Splitter on Kelly :)

Currently reading:
Styling Fitted Splitter on Kelly :)

Joined
Nov 26, 2009
Messages
297
Points
147
Location
Buxton
Hey,

I fitted the mk3Golf Splitter on cinq :) Only had abit of speed bump problems haha :p

I only got this picture atm as my phone is updating so cant get any photos off it etc... but here is a side image :)

380547_2819165355459_1148651964_33172348_602156684_n.jpg


What you think?

Jamie
 
Normally, bumper off, turn upside down and run a bead of tiger seal accross the bottom.. Stick the spoiler on, and then put a few self tappers or small bolts through the back of the spoiler (where their hidden out of sight)... Leave to dry and refit to the car.

Ive done this to a few low cars & hit many speed bumps with no problems...
 
Normally, bumper off, turn upside down and run a bead of tiger seal accross the bottom.. Stick the spoiler on, and then put a few self tappers or small bolts through the back of the spoiler (where their hidden out of sight)... Leave to dry and refit to the car.

Ive done this to a few low cars & hit many speed bumps with no problems...

Yup, thats what I done :)

Here is pic from front :)

387552_2822354075175_1148651964_33173062_312269163_n.jpg


Jamie :)
 
Im going to try and avoid the tigerseal at all costs as I don't want nasty sticky stuff if I don't like it, so I'll bolt it on for extra security. Did you not have to trim it back at all to fit, mine will certainly need it to not protrude into the wheel arches.
 
Back
Top