Technical Fiat Bravo 1.6 multijet 120 hp limp mode at 70 km and acceleration pedal doesn't work

[Laviniu]

Hy, i have a Fiat bravo 1.6 multijet 120 hp 2014, the car enter in limp mode at 70 km/h and if i stop the engine and the engine is not heated good the engine starts for five seconds and after that it stops . The accelerating pedal is not working at all, and it will do like that for an hour and after that will start ok but limp mode is still there. Does somebody had the same problem , and how you resolve it. Thanks

 

[aschiuta]

Hy, i have a Fiat bravo 1.6 multijet 120 hp 2014, the car enter in limp mode at 70 km/h and if i stop the engine and the engine is not heated good the engine starts for five seconds and after that it stops . The accelerating pedal is not working at all, and it will do like that for an hour and after that will start ok but limp mode is still there. Does somebody had the same problem , and how you resolve it. Thanks

Which town are you from? Try to find someone with diagnostic tool multiecuscan and find error code.

 

[Laviniu]

Which town are you from? Try to find someone with diagnostic tool multiecuscan and find error code.

Till now 4 mecanics with multiecuscan tool dit not resolve the problem, even somebody from Fiat. The only error was the presure regulator that i changed and the problem is still the same. I change the regulater from the pompe, the fuel filter, turation sensor. Egr is fine and the ECU was updated.

 

[aschiuta]

Try to make you user on https://www.alfaclub.ro/forum/index.php and ask for help there from users from your location. This motor type is on Mito and Giullieta.