This is a simple process for both cinqs and seis
To make life easier you may wish to remove the bumpers.
This is assuming the bumpers are off the car.
1) Turn the bumper so you can see the back of it
2) There should be a ridge in running along the centre of the bumper which is where you should find several small screw heads (posi)
3) Unsrew all of them and the inserts should come away.
4) Spray any colour you fancy. Remembering to laquer them before refitting.
For the vent hole/ornamental gasket as many people call it. the srews are visible from the rear but are a little more fiddley to remove.
The rear strips can also be removed on the car with the rear end jacked up. (cheers arc)
please do not reply to this post. hopefully it will be made sticky.
if there is any additions you would like to make pm me and il update acordingly
To make life easier you may wish to remove the bumpers.
This is assuming the bumpers are off the car.
1) Turn the bumper so you can see the back of it
2) There should be a ridge in running along the centre of the bumper which is where you should find several small screw heads (posi)
3) Unsrew all of them and the inserts should come away.
4) Spray any colour you fancy. Remembering to laquer them before refitting.
For the vent hole/ornamental gasket as many people call it. the srews are visible from the rear but are a little more fiddley to remove.
The rear strips can also be removed on the car with the rear end jacked up. (cheers arc)
please do not reply to this post. hopefully it will be made sticky.
if there is any additions you would like to make pm me and il update acordingly
Last edited:
