needur help pls
New member
- Joined
- Mar 4, 2013
- Messages
- 2
- Points
- 2
I have a 75 124 spider. the engine was just rebuilt with 10 over pistons and the top end is good also. I have been thinking about replacing the standare weber adfa carb with dual weber idf 36 carbs. Is this too much carb for the engine/ cam setup? Has anyone done this ? What kind of performance issues arose?
If I don't do the dual webers, And decide to stay with a single carb,I would like to remove the air canister, egr and most of the vacuum hoses associatied with this factory setup. Which carb would work on this intake? I have already removed the egr and catalytic. The exhaust is pretty straight and clear. I changed the exhaust manifold to an older fiat manifold which has the appearance of a header like construction.
thanks for you input.
If I missed a similar article I did run several searches for the info but came up empty
If I don't do the dual webers, And decide to stay with a single carb,I would like to remove the air canister, egr and most of the vacuum hoses associatied with this factory setup. Which carb would work on this intake? I have already removed the egr and catalytic. The exhaust is pretty straight and clear. I changed the exhaust manifold to an older fiat manifold which has the appearance of a header like construction.
thanks for you input.
If I missed a similar article I did run several searches for the info but came up empty