Technical Doblo wont start after engine change.

[Torenorway]

Hi all.
I have change engine in my opel combo. 2013 Simular to doblo.with engine code 263.A2.000. 1.3 90 hp. Same code on donor engine. Fiat doblo.
It will not start at all, maybe air in dieselsystem
I search some knowledge/help about these engines, i have not change injectors from fiat engine to opel engine, will these engines start without coding injectors ? Electronic wire system on engine is also the same. .

I Will be very satisfied if someone can guide me to get start on this engine.
Thanks
Tore. Norway

 

[varesecrazy]

Hi,

I suspect you are not injecting fuel due to a sensor..

Is the immobiliser clearing, and fuel pump priming?

 

[Torenorway]

Hi, there
Maybe i do wrong for bleed this common rail. i am not sure about the immo. But diesel feed pump is working when put on ignition. The enginge crank.
No faultcodes.

 

[Torenorway]

These 2 connectors , they are not 100% same pin . Next to ecu , on same harness. Could these maybe be wrong ,

 

[varesecrazy]

Hi, there
Maybe i do wrong for bleed this common rail. i am not sure about the immo. But diesel feed pump is working when put on ignition. The enginge crank.
No faultcodes.

It doesn't need bleeding like hard lines. (it bleeds like a modern petrol)

BUT.. It needs the ECU to open the injectors