Hello folks. I have a 2003 doblo cargo,its the type that didnt have a temp guage or rev clock so i fitted a complete dash from a other van. All loom connections were the same so everything worked fine except the milage ,which now just flashes but is recording the miles.I hope someone can maby tell me how to stop this. Thanks Tom.:bang:
doblo dash issue
- Thread starter tomd58
- Start date
Currently reading:
doblo dash issue
It needs a proxi alignment. This is because the mileage on the replacement cluster is different to that which the vehicle has traveled. If the replacement is lower that the origional then your local dealer can increase it to match the correct figure. Or you could do it yourself with fiatECUscan software 
Ah,thank you so much,that is of great benefit and yes there is a difference of about 8k.I did take a note of the old milage before i took it out. My friend is going to have a go at it on monday now that we know what,s needed.Thanks again. Tom
Thats ok.
For reference the km the car has traveled will be recorded on the body computer, it's just a matter of over writing the ODO KM reading to match the body computer
For reference the km the car has traveled will be recorded on the body computer, it's just a matter of over writing the ODO KM reading to match the body computer
