coffeegeek
New member
- Joined
- Jul 19, 2013
- Messages
- 2
- Points
- 1
Hi all,
I need some expert advice on how to proceed with this damage to the upper front support. I can think of a couple of solutions.
1. Grind away all the existing welds and replace the entire piece.
2. Cut the support before the damage and weld on a good peice from the wreckers
3. Bend it back into shape and hope it's aligned so the front quarter panels, radiator support, and headlight mounts are all in the right place.
There is no damage to the chassis or any structural components.
I hope you can help!
Thanks,
Coffeegeek
I need some expert advice on how to proceed with this damage to the upper front support. I can think of a couple of solutions.
1. Grind away all the existing welds and replace the entire piece.
2. Cut the support before the damage and weld on a good peice from the wreckers
3. Bend it back into shape and hope it's aligned so the front quarter panels, radiator support, and headlight mounts are all in the right place.
There is no damage to the chassis or any structural components.
I hope you can help!
Thanks,
Coffeegeek
Attachments
Last edited: