Hi. Anyone know where i can source the clips in the attached photo please? Water getting through onto engine due to rubbish seal and most clips broken. Going to try and seal it using 10mm double sided tape and some strong sealant. Is this the best way? Cheers. Daf
Technical Clips needed for scuttle-2011 Ducato
- Thread starter Cochyn1
- Start date
Currently reading:
Technical Clips needed for scuttle-2011 Ducato
eBay. Just identify the right ones as will be generic not Fiat.
These are the only ones i can find? Look the same
Attachments
Not sure, does your rubber seal have rectangular slots so the clip can go in and turn 90 degrees to hold in place, if so maybe.
Can you get one out intact , I use a tool for removing door trim etc. but you have to get it in the right place to avoid breaking clips.
Can you get one out intact , I use a tool for removing door trim etc. but you have to get it in the right place to avoid breaking clips.
Majority were broken and others damaged. This is the most intact i have
Attachments
If you give the exact model details or look on the down load data someone may give a better idea or even a part number.
I did have a quick look on my 2010 Scudo but getting bit cold and dark to mess around.
I did have a quick look on my 2010 Scudo but getting bit cold and dark to mess around.
No worries! Mines a 2011 2.3 130bhpIf you give the exact model details or look on the down load data someone may give a better idea or even a part number.
I did have a quick look on my 2010 Scudo but getting bit cold and dark to mess around.
These look the same
Mike
50 x Plastic Side Moulding Trim Clips suitable for RENAULT PEUGEOT CITROEN FIAT | eBay
Find many great new & used options and get the best deals for 50 x Plastic Side Moulding Trim Clips suitable for RENAULT PEUGEOT CITROEN FIAT at the best online prices at eBay! Free delivery for many products.
www.ebay.co.uk
Mike
Last edited:
This post contains affiliate links which may earn a commission at no additional cost to you.
