Technical Can't find this part in the Eper tool?

[Aad Doix]

Dear Forum,

Tomorrow I will clean the paravan part, the "bin" just in front of the front window. Just checking this morning I saw that a piece of rubber is missing partially. This paravan has 2 rubber strips, a big one on the steel panel dividing the paravan from the engine bay and a smaller one just below the windshield wipers. The latter one is half missing or how do you say that in proper English (see images)?
My question is: I can't find it in Eper so does anyone know what the partnumber is of this piece of rubber and is it Fiat specific or is it a general part which can be bought anywhere?

Thanks in advance for your reaction and kind regards,

Aad

 

[koalar]

It should only go half way across

 

[ZaphodB]

It should only go half way across

View attachment 468222

I've seen a pic that appears to contradict that

.... at least on a mk2

https://allegro.pl/oferta/fiat-panda-ii-2-03-13-podszybie-17527742732?bi_s=ads&bi_m=productlisting:desktop:queryandcategory&bi_c=MTAxNjhiNmEtNjJmNS00OTgxLWFiNDMtZjIyZGRkNjk2OTZjAA&bi_t=ape&referrer=proxy&emission_unit_id=33802ad0-d1e8-4aaf-8e45-8a84e8046d8e

and yet there (here) it is (half way ) on a mk3:

and again only half way across on this one:

https://thumbsnap.com/sc/ah86tOoL.jpg

 

[Aad Doix]

It should only go half way across

View attachment 468222

Seriously? A bit flabbergasted overhere. I could not imagine a reason why this should only be halfway? I can't remember how this was in the Punto type 176 and the Punto type 188 I had years ago.....

 

[ZaphodB]

Seriously? A bit flabbergasted overhere. I could not imagine a reason why this should only be halfway? I can't remember how this was in the Punto type 176 and the Punto type 188 I had years ago.....

You could probably use a generic seal if you want it all the way across

Classic Vehicle Seals from - The Metal House

Buy from our huge range of door, boot and window seals. Find the suitable part for your pride and joy from our Classic Vehicle Seals.

themetalhouse.co.uk

 

[koalar]

I had three they all 2005, 2006 and 2011 they all go half way across

As do the majority of photos online

I don't know what was going through the designers mind, heat flow, drainage, drag coefficient

I doubt you find a fiat part number as that's not how they were originally, at least for the 1.1, 1.2, 1.4 or 1.3 UK models


The photo you posted is a natural gas version,.which has the ECU on the shuttle so I guess you could fit the wrong part from this model if you wish

 

[koalar]

Just copying the photo from post 3

When people look back in a few years time the link will be dead

Natural power with the ECU in the scuttle area have a longer gasket

 

[koalar]

Punto type 176 and the Punto type 188 I had years ago.....

The Puntos are just different

And there quite a few variations

But most of the Punto range had either none at all or only one

Compared to the pandas 1 and a half