Technical Bonnet buffers?

[spxak1]

It appears I'm missing 3 bump stops from the bonnet. I've looked up for generic ones on ebay but they are too short.

ePER gives part number 51925627 but they're £9 each!

I can find part number 7781964 on ebay for £8 for two, but they look a bit shorter.

Has anyone bought anything that did the job?
Any ideas?
Thank you!

 

[The Panda Nut]

They dont need to be fully screwed in mine are only half way for adjustability. Ilmeasure them and post back

 

[The Panda Nut]

about 40mm on 2016 car some on mine are longer but only part way screwed in The 40mm ones all screwed on all the way so 30 mm would be minimum realisitcally

 

[spxak1]

about 40mm on 2016 car some on mine are longer but only part way screwed in The 40mm ones all screwed on all the way so 30 mm would be minimum realisitcally

Thank you very much! So if some are part way screwed in, that would make them even longer, so I guess that Alfa part won't fit.

 

[PuntoHowTo]

Look on temu or Ali express, loads of options on their just make sure to search for “hood” bumpers, much easier to find things if you use American terminology

 

[spxak1]

Look on temu or Ali express, loads of options on their just make sure to search for “hood” bumpers, much easier to find things if you use American terminology

Thanks,

I've ordered these. They look similar. I will update when received.

 

[spxak1]

Thanks,

I've ordered these. They look similar. I will update when received. View attachment 482556

I can confirm these worked perfectly. They are not identical to the OEM, but they have the right thread (a bit tight though) and total length to match.

 

[PuntoHowTo]

Good stuff and thanks for reporting back.

If they are tight at least they won’t move once in place. Sounds like a good result

 

[spxak1]

Good stuff and thanks for reporting back.

If they are tight at least they won’t move once in place. Sounds like a good result

They are great, possibly better than the OEM. I will post photos tomorrow.

 

[Peter Pick-Up]

Thanks,

I've ordered these. They look similar. I will update when received. View attachment 482556

Do you have an Aliexpress part/order number..??

 

[Peter Pick-Up]

Do you have an Aliexpress part/order number..??

Allready found and ordered it, thanks....

 

[spxak1]

Side by side comparison.
The OEM

And the one from Aliexpress: