endrop - for all your online needs

General Axile

Currently reading:
General Axile

N

Night35

New member
Joined
Aug 26, 2020
Messages
43
Points
19
Location
Kent
Had a rear axile fitted 2-3 months ago.

Been clucking happening and decided to have another garage have a look. The result is the garage that put the axil on hasn't fitted it properly- too far one way. Creating the clucking.
I was so f' odd I forgot to ask this need resolved ASAP- ?
 
The rear axle is attached to brackets that bolt under the car. There is no provision for adjustment. The axle pivots on rubber bushes which might have been set incorrectly. However axles can get bent by impact or incorrect used of a lifting jack. If a used axle has been fitted, you may find the misalignment is caused by damage to the axle itself.
 
Guy says sitting off the bushe hence the clunking. Was a new axile fitted a few months back

Could I just leave it as the thought of the agro taking it back! I only had it replaced to pass the MOT.
 
Last edited:
Can you get under the car and take some pictures of axle where in mounts to the car at the front side of it
Will try tomorrow and post up. Never thought.
 
You must log in or register to reply here.
Back
Top