General Android aftermarket radio flashing ODO

[tonnaf]

In the meantime, thanks.
I ordered the Hiworld canbus that you suggested Canbus Hiworld and I looked at the thread where you explain perfectly.
I'll try to see if I can solve it this way and at worst I'll look for someone with MES and a yellow cable (or I'll buy this too but I have doubts because my laptop has Windows 11 and I don't know if MES is compatible).
If I can solve it you have won a good bottle of Italian wine from my area (I prefer spending on friendship than throwing money at the fiat assistance center for a proxy alignment).

i think all will be resolved , I solved some similar cases here... if you have any problem just reply i can send you the number(whatsup) of support team and they will resolve any kind of... about MES you can order yours.. i can send you a cheap link for the dongle and a yellow cable with the new chip for fiat that for me works perfect.

I have enjoyed the wine of your country for several years when I studied at Tor Vergata and my connection with Italy is old and familiar too.
Italy is beautiful not only for the taste of the wine but for everything it represents, my father used to say.. if you drive a Fiat 500 without listening inside, Albano, Toto or Adriano is nonsense

 

[Martello]

Thanks very much I would be happy if you sent me the MES purchase link and whatsup number of the support group (also in private message if you prefer). As soon as I get everything I'll try to solve the problem of the km flashing. They don't bother or cause problems but I prefer not to have errors or problems in the bcm

 

[Paulf007]

I had the same problem and Replacing the Canbus with the HiWorld Canbus also solved my problem.

 

[Martello]

Yesterday they lent me a cracked MES with elm and yellow connector.
I had the opportunity to check the proxy alignment and any errors.
I thought that the installer had removed the blue&me module without performing proxy alignment but instead there were no errors in the Proxy configuration and the bluetooth module is regularly deactivated and not present.
I was therefore unable to understand why the Km continues to flash.
I tried to configure the CanBus as suggested (waiting for the other Hiworld one ordered to arrive), the installer told me that the CanBus present is already Hiworld FT05.20 (I got the radio on Amazon and sent it directly to the installer, in the photos of the canbus on the Amazon website it looks like a
I tried to move it with the radio keys to see for myself but I can't hook the pins to remove it and at this point I didn't want to go back to the installer.
The only adjustment tested and working, except for the Km which continues to flash, is RAISE - Fiat Doblò 2017 Turkey All.
At this point I start to not understand anything anymore, I keep this configuration and keep the km flashing.

 

[tonnaf]

Yesterday they lent me a cracked MES with elm and yellow connector.
I had the opportunity to check the proxy alignment and any errors.
I thought that the installer had removed the blue&me module without performing proxy alignment but instead there were no errors in the Proxy configuration and the bluetooth module is regularly deactivated and not present.
I was therefore unable to understand why the Km continues to flash.
I tried to configure the CanBus as suggested (waiting for the other Hiworld one ordered to arrive), the installer told me that the CanBus present is already Hiworld FT05.20 (I got the radio on Amazon and sent it directly to the installer, in the photos of the canbus on the Amazon website it looks like a
I tried to move it with the radio keys to see for myself but I can't hook the pins to remove it and at this point I didn't want to go back to the installer.
The only adjustment tested and working, except for the Km which continues to flash, is RAISE - Fiat Doblò 2017 Turkey All.
At this point I start to not understand anything anymore, I keep this configuration and keep the km flashing.
View attachment 451922

View attachment 451923

hello,
RAISE its a good canbus but its for other BCM production of fiat 500 EU,UK soft installed.. , i belive that with the product that i suggested do a prox alig and pair new radio with bcm, all this will be resolved, more than 10 cases are resoved unitl now

 

[Martello]

Good morning, today the right canbus finally arrived (can you confirm?) and in the next few days the existing one will be installed and replaced (which should be Raise even if the installer had said Hiworld). Can you confirm that the setting will have to be HIWORLD and I will have to try the 3 options High, Medium and Low? I hope I can get everything sorted out. The car is a 2012 Fiat 500 1.2 8 valve.
Do I need to do anything else next besides the Proxy workout?
Should the flashing kms settle before the Proxy alignment with the MES?
Thank you

 

[tonnaf]

Hello,

Just follow the every step here ,

Odo flashing, aftermarket radio | FIAT 500 (2007+)

Hi. Some family has just bought 2008 500, with an android radio. Odometer is flashing, and I think it's because of this. Is there any fix for this?

www.fiatforum.com

Hope you order with iso cable (the hiwolrd connector from same store )

The unit MUST be connected to the internet while all processes.

Canbus Hiwolrd - Fiat - 09_Linea , select done

Good luck

 

[Martello]

Hello,

Just follow the every step here ,

Odo flashing, aftermarket radio | FIAT 500 (2007+)

Hi. Some family has just bought 2008 500, with an android radio. Odometer is flashing, and I think it's because of this. Is there any fix for this?

www.fiatforum.com

Hope you order with iso cable (the hiwolrd connector from same store )

The unit MUST be connected to the internet while all processes.

Canbus Hiwolrd - Fiat - 09_Linea , select done

Good luck

Yes, I also have the ISO connector from him, over the weekend if I have time I'll assemble everything and keep my fingers crossed. In the meantime, thank you again for the courtesy, commitment and time you dedicated to me

 

[Martello]

In recent days I mounted the Hiworld canbus and the connector I ordered, I did a check with MES before changing everything and there were no errors, I put the suggested settings and the odometer always continues to flash, I also tried the other settings suggested but to no avail. I disconnected the battery for 20 minutes and redid the Proxy alignment but not only did the odometer continue to flash but also the setting of the rear camera and the RDS function of the radio were lost and I had to set them again. I finally gave up and decided to keep the km flashing. Everything else works perfectly, MES doesn't report any errors but the odometer doesn't want to stop flashing.

 

[tonnaf]

Hello, follow the steps below, there are alot of people that fix km flashing, including me

Hei , first you must update your hiworld , after this “protocol update“ the android unit must be connected to internet (use your mobile hotspot) go to factory setings on your android device and put pass , usually 8888 , select canbus hiworld , here you have 3 selections ( hi,medium ,low , config) the others are not compatible for fiat 500.

“High configuration corresponds to 18 Doblo
Medium configuration corresponds to 16 DOBLO
Low configuration corresponds to 09_Linea
Extra configuration corresponds to 11 500 “


Select ex. Linea_09 this click save/ok and wait for about 30sec (let the canbus to communicate with server and bcm of your fiat ) key off , key on , km will stop flashing ,
If no repeat the process with medium and high configuration

 

[Martello]

Hi, I tried to follow the steps you mention again but without success. My error is probably in the first step "update Hiworld" because the subsequent steps still appear slightly different to how you report them. I go directly to the Android device settings and set the password (1234 in my case, radio with Jencar firmware), Hiworld protocol canbus and I still have to set the model and year to then get to the High, Medium and Low choices. I have obviously already tried various models and years among the suggested compatible ones. Would you therefore be willing, even with a personal message or email, to send me the file for updating the Hiworld canbus? so I can try one last time following step by step or give up permanently. Thank you

 

[Martello]

I think the problem in not finding a solution despite the precious advice you are giving me is in the Android stereo system which is different: Mine is based on jcac firmware and not on the classic junsun v1. The passwords to enter the configuration are: 1234 for the factory settings (the one tried so far), 5678 for android settings and 56789 for engineering mode. I can't find a canbus configuration that will stop the km flashing. Any suggestions are welcome and appreciated.

 

[tyrell0133]

Hello I have similar problem as @Martello on Fiat 500 my2011.
The unit works well, carplay is ok, streering wheels control is ok like all info about car like doors opened etc.
But odometer is flashing.
I already disconnected blue&me unit and aligned the proxi using MES (failed on ETM obviously).

My unit should be SimpleSoft canbox and protocol used is Simple-Doblo-All.
Already tried with several Raise protocols but nothing solved.
Using Hiworld protocol my odometer still flashing and steering wheels controls does not work.
So this protocol is not good on my unit at the moment.

How can I fix it? Should I change canbox? Which one?

Here some details about versions