Styling Alloys on car finally

Currently reading:
Styling Alloys on car finally

a-m-y

New member
Joined
May 23, 2006
Messages
90
Points
21
Location
Liverpool
SP_A0946.jpg


What does every1 think ?
 
activematt said:
Yeah thought id get in there first before everyone else does;) Are you planning on lowering..........please say yes

hopefully yes how much do u wreckin i do it ?
 
looks cool

id say a 50/60mm drop would look well nice personally id go 60mm but the ride would be quite hard
 
maybe a 35mm/40mm would be better for you then although people dont relise that even a 60mm drop CAN get over a decent sized speed bump if you take it slow enough
 
OxO said:
maybe a 35mm/40mm would be better for you then although people dont relise that even a 60mm drop CAN get over a decent sized speed bump if you take it slow enough

yeh suppose. how much u wreckin that wud cost?
 
you can get a basic full kit for 35mm/40mm for about £200 or 60mm drop would be about £300(ish) you could get them cheaper but id say get a decent se as you get what you pay for;)
 
OxO said:
you can get a basic full kit for 35mm/40mm for about £200 or 60mm drop would be about £300(ish) you could get them cheaper but id say get a decent se as you get what you pay for;)

What is it fitted ?
 
nope thats just for the suspension kit! cant see it being more than £100 for fitting or if you know someone who is good at DIY you could ask them, its not a really hard job
 
try http://www.tuning.co.uk/fiatshop/ then click MK2 Punto they have all sorts and a suspension kit but its like 400 and summet pound

you could also put 30/35mm springs on your standard shocks but some people dont advise this as it can aventually break your shocks but if your short for cash you can lower your car for under £100

i know people who have done this and its lasted a couple of years and still counting;)
 
Back
Top