Tuning 38TB time

[magijamarko]

Hi..am about to have a go at Dremelinig my Punto TB to the dimensions, required by my cinq...
But, as my GF is using it to get to work every day..and comes home after dark..i am unable to measuere the Cinqs diameter...
I would need the INSIDE diameter of the CINQ part,where the injector sits, at the lover spot(where it touches the TB)-i hope you know what i mean..
I need this to be able to grind of the required amount..

Thanx for any imput..
Marko

 

[magijamarko]

Bump

 

[fingers99]

e really need pics of what you mean. Even then, I'd not do it myself without all the bits in front of me.

 

[magijamarko]

A picture of the TB/injector parts

http://www.carsfromitaly.info/attachment.php?attachmentid=19297

I would need the lower diameter of the part without he butterfly..which sits on top of it

Another picture from the german Carsfromitaly forum..
http://www.carsfromitaly.info/attachment.php?attachmentid=19302

Ps..do i need gaskets?? Am looking at EPER..and have no clue..Or i'll get gasket paper and make my own

Hope my explanation helps..

 

[fingers99]

Sort of -- but I don't understand why you're not using the whole thing (in which case you'd need to port it on the inlet mani (which you'll need to do anyway, I think).

 

[arc]

38mm tb is MPI

info might be in here?

https://www.fiatforum.com/cinquecento-seicento/23249-punto-75-throttle-body.html

If not, blu73 has the top end of a cinq TB on the floor of his shed / garden!

 

[magijamarko]

Nop...there is no information on this in that post..
I'll just contact blu73 in hope that he will take the time to measure it
Any ideas on the gaskets??

Thanx

 

[arc]

I'd just get some gasket paper and cut it to fit. Failing that I've used cornflake packets cut up in the past