Hello all, I'm after a little bit of advice.
This Panda (Wife's car) is coming up to a year in my ownership. After the inital problems with the Dualogic clutch failure, it's actually be running well.
Now the weather is a little warmer I've noticed that occasionaly on starting the engine finds it difficult to reach a good idle (normally idle is around 1000RPM), but it will sit there at 500RPM and be unresponsive to the throttle. Once started I've never had any issues at all. Turing off and starting again often gets it going.
Any pointers where to start?
I don't have a scanner for this car, but might consider one if it could help with diags.
Cheers,
Steve
This Panda (Wife's car) is coming up to a year in my ownership. After the inital problems with the Dualogic clutch failure, it's actually be running well.
Now the weather is a little warmer I've noticed that occasionaly on starting the engine finds it difficult to reach a good idle (normally idle is around 1000RPM), but it will sit there at 500RPM and be unresponsive to the throttle. Once started I've never had any issues at all. Turing off and starting again often gets it going.
Any pointers where to start?
I don't have a scanner for this car, but might consider one if it could help with diags.
Cheers,
Steve