will this
https://www.fiatforum.com/classifieds/showproduct.php?product=17699&cat=63
fit in a regular punto flat door cards, as you can see it the right of the attached picture


thanks!

In theory it should fit, although you may need to punch some holes in your door cards. I would advise that you remove one of your door cards and have a look at the mounting holes behind. These pods require mounting screws along the lower edge and a screw level with the top of the speaker hole.

I notice, looking at the photo of the speaker pods that one of them appear to be missing a mounting lug level with the top of the speaker. If it is broken off, but included, this should not be a problem as it is under compression when fitted and a bit of glue or plastic weld will be sufficient to hold it in place.

i dont really care about scrows as i can fit them somehow. the problem is with the shape of the back of this part, is it all flat or is it curved? for example:

I'm not so sure they will...I'm just trying to find my green car keys and then will post pics why I think it might be a problem

liorwohl said:

i dont really care about scrows as i can fit them somehow. the problem is with the shape of the back of this part, is it all flat or is it curved? for example:

Click to expand...

It's curved....pics from a 5 door ELX




Behind that curve it is empty and butts up to the card. So you would need the whole door card

I take it you have an sx 5 door?....3 door (sporting) speaker pods are flatter, but if it is for a 5 door they would be no good either as they are much longer.

Cabrio ones are too long also, being 3 door and also curve.

So I know these pics will be no use to you really, but for anyone else wondering about fitment...

pic taken from sporting 3 door


from cabrio

OK thank you very much :worship:

in ebay italy they have this thing which is perfect, but 80 euro + shipping
http://cgi.ebay.it/Tasche-porta-alt...emQQptZRicambi_automobili?hash=item2303f9540e

maybe somebody have another idea how to fit 6.5" in the doors, and make it look good?
in my Uno i fitted the speakers with a simple adepter, but it was quite ugly