General How do to pull out heater controls btns?

Currently reading:
General How do to pull out heater controls btns?

Muddz

New member
Joined
Jan 1, 2015
Messages
41
Points
13
I'm trying to replace the bulps behind the heater/fan controls. But I have no clue about how to remove the 3 controls out so I can remove the bulbs?
The car is a Fiat Punto, Year 2001 or MK2

attachment.php
 

Attachments

  • 2015-10-16 17.05.19.jpg
    2015-10-16 17.05.19.jpg
    1.4 MB · Views: 175
Last edited:
Hi. Yea I have seen that, But now I'm stuck with the part of how to remove the heater Dials.
 
Hi! I did it. Now time to the bulbs.. Do I have to only the bulbs out ie. only the glass? or also the plastic around it?
 

Attachments

  • Udklip.JPG
    Udklip.JPG
    45.5 KB · Views: 31
Allright thanks.. i will do that before i pull them out
 
bulbs also just pull out, but watch out when pulling them out, i made a short and airbag light was on after that, better to disconnect battery first
I'm in a spot of bother! Tried replacing the bulbs and inadvertently caused a short after I broke one in the housing. :mad: now none of the bulbs light up. I've checked and double checked all 4 bulbs and their polarity to see if they have blown, (which are all working). Question are the bulbs connected to a shared fuse somewhere? I can't figure out what the problem could be. Any ideas on what to do next would be much appreciated. :bang:
 
I'm in a spot of bother! Tried replacing the bulbs and inadvertently caused a short after I broke one in the housing. :mad: now none of the bulbs light up. I've checked and double checked all 4 bulbs and their polarity to see if they have blown, (which are all working). Question are the bulbs connected to a shared fuse somewhere? I can't figure out what the problem could be. Any ideas on what to do next would be much appreciated. :bang:

have a look at this fuse

attachment.php
 

Attachments

  • j.PNG
    j.PNG
    97 KB · Views: 102
Back
Top