Bumblebee1
New member
- Joined
- Apr 16, 2014
- Messages
- 15
- Points
- 3
Hi Everyone,
So here's a long story short. I have a mk2 Punto 1.2 16v sporting.
The exhaust looks like it is causing the airbox to melt. I changed the bottom half of the airbox that contains the filter thinking it was caused by a recent overheating issue I had but its now melting the new airbox.
Connected to the ECU and it reads P0340 camshaft position sensor error code, cleared it but it comes back when the engine is started. I changed the camshaft sensor for a new one and still has the fault. There doesn't seem to be faulty wiring with that sensor.
Also has a P1135 pre cat sensor error.
Does anyone know what is causing the airbox to melt and how to rectify the camshaft position sensor error?
Much appreciated!
So here's a long story short. I have a mk2 Punto 1.2 16v sporting.
The exhaust looks like it is causing the airbox to melt. I changed the bottom half of the airbox that contains the filter thinking it was caused by a recent overheating issue I had but its now melting the new airbox.
Connected to the ECU and it reads P0340 camshaft position sensor error code, cleared it but it comes back when the engine is started. I changed the camshaft sensor for a new one and still has the fault. There doesn't seem to be faulty wiring with that sensor.
Also has a P1135 pre cat sensor error.
Does anyone know what is causing the airbox to melt and how to rectify the camshaft position sensor error?
Much appreciated!
Last edited: