Simple question.
Where the heck is the interior fuse box on my Panda Cross?
The Owners manual states its under the steering wheel; however the panels I can see seem very "well fastened" ie not easily removable.
I ask this question only because I have previous form for cracking plastic panels when trying to remove them and I don't want to risk damaging if its the wrong one!!
I've seen rumors the fuses are actually behind the glove box in RHD cars.
The manual isn't exactly helpful!!
Regards
Richard

Hi Paclampet
you may find your answer in the Panda post 2012 mk4 threads...……
this is the 169 Panda section

09 johno said:

Hi Paclampet
you may find your answer in the Panda post 2012 mk4 threads...……
this is the 169 Panda section

Click to expand...

I looked.. didnt find much..

Dashcam threads mention fusebox behind glovebox

Didnt see pics..or a GUIDE

left side of the steering wheel. Accessed from underneath ?

Quite likely similar arrangement to the 169 Panda.

Move driver's seat back.
Put head under dash, resting on the pedals.
Above where right foot would normally be is the fusebox (on the 169).

Then book time with the chiropractor.

Found it, its in the glovebox behind a special panel. Easy enough to access
Vehicle handbook is a bit out with that one (suspect its for LHD versions)
Thanks anyway guys.

I will have to have a look.. and add some pics

wish I could find my fuse box that houses the 20 amp for my electric windows

All the big fuses are normally in the engine bay ?

Owners manual lists them all


First place to check as location change from year to year and model to model but the manual is always correct

Our (right-hand drive) 100HP and 1.2 Dynamic both have fuse boxes on driver's side below and outboard of the steering wheel. One is directly under the fuse box cover. The other is above and further back. The engine bay fuses are by the battery.

westy2501 said:

wish I could find my fuse box that houses the 20 amp for my electric windows

Click to expand...

According to my handbook these should be the ones - but this is for a 2004 1.2
As koalar says, they did move about a bit during production.

confusing


two thread running asking the same question



https://www.fiatforum.com/newbie-central/487358-fiat-panda-2009-fusebox.html?p=4598059

Indeed..

koalar said:

confusing


two thread running asking the same question



https://www.fiatforum.com/newbie-central/487358-fiat-panda-2009-fusebox.html?p=4598059

Click to expand...

And this thread asking about a
'2017 panda 169' :spin: