so does this exist? i am sure i have seen a picture of such a thing that sits just behind the front seats...?

if anyone knows where i am able so source such a thing i would be very grateful:worship:.... and if you have one to sell i am sure i would have the funds for such an item.

please note, this is not going to be used for Bea... i may be getting a mk3 for myself. kinda fell in love with the one i got my sister! makes me really want one!

They exist as do panda van conversions. But I have only ever found these on Italian websites and never anything in the UK, and I have looked.

Be interested to see if your search turns up anything.

Well I am willing to pay for shipping.

Must you have the OEM pressed steel bulkhead? Could you make one with plywood?

Bear in mind that whatever you fit, the carpets will have to be cut to bolt it down to the floor.

They exist in Europe. Both the French and Italians have company car tax benefits that require only two seats to be fitted, so 'commercial' Pandas will have a bulkhead. Doesn't go all the way to the roof though.

And, at least on the Pug 1007 I had, it stopped the front seats reclining much.

French ones typically come with a load cover and a flat floor.

Breakers yard in Calais maybe?

What you need is a 'Kit GRUAU'

example for a 500L

http://www.accessoires-fiat.fr/2034-kit-vpc-vp-vu-500-l-avec-cache-bagages

It's called the Partition Panel.

They fitted a few different versions.
One fits where the rear seat backs would be, which caged off what would normally be the boot area.
And
One the fits behind the front seats that cages off the whole of the rear.
This one includes a flat floor panel to cover the rear foot wells.

The part number for the latter one is 98615030 but there's a whole host of clips and brackets to hold it all in.

They sold some cheeky window grills as well.

You will probably need to look far and wide for one as they never sold the van version here in the UK.
I seem to think they were only sold in Italy and Poland, though a few used have made there way around mainland Europe.

https://www.fiatdalys.lt/lt/katalog...0X/0/0/M4,M5,M6/0/GS/partition-panel#98615030

thanks for the help guys, i managed to buy a full conversion kit from Ebay.it for 99 euro and 48 euro shipping!

this will be good!

Seriously!!! I spent ages the other day on eBay.it trying to find one. Seems my ebay skills are very week.

Well done, keep us updated on how it works out.

Have you got a link?

Kronkron said:

Seriously!!! I spent ages the other day on eBay.it trying to find one. Seems my ebay skills are very week.

Well done, keep us updated on how it works out.

Click to expand...

that comes from having the old style pandas.. ever tried to get sills for one of those? the Italians call them "soto porta".. under doors. they say where it is... not what it is. use that trick for many old panda parts.

Cinq999 said:

Have you got a link?

Click to expand...

this was the one i got:
https://www.ebay.co.uk/itm/KIT-TRAS...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

Dragon Man said:

this was the one i got:
https://www.ebay.co.uk/itm/KIT-TRASFORMAZIONE-VAN-FIAT-NUOVA-PANDA-NEW-2012-in-poi-change-your-panda-VAN/223874977426?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Click to expand...

Isn't that from a 2012 onwards Panda?

apparently the van conversion works for the mk3 and later model. apparently this kit that i bought was originally from a 2005 panda but it does fit the later 2012 onwards pandas.

Thanks for the info, will see if I can improve my Italian search skills lol. Might be nice to replace my DIY van conversion with an official version.

Kronkron said:

Thanks for the info, will see if I can improve my Italian search skills lol. Might be nice to replace my DIY van conversion with an official version.

Click to expand...

Is this what you are looking for?
https://www.milanuncios.com/anuncios/panda-van.htm?fromSearch=1

Many thanks Txuchin

I can't see what I'm looking for but that looks to be a great resource for the future.