Hi guys

New to the site so sorry if this has been covered before. I have a Panda 100hp

I have poor clutch pedal feel and I have identified a squeak from the slave cylinder I read this is quite common.

My questions are:
How easy is it to replace.
How easy is it to bleed
Can I use an easy bleed as I will be on my own
Where is best to buy one?


I see LUX ones on eBay. Any good?

Thanks in advance

welcome to the forum, click on search this thread put slave cylinder, click, all answers there

LUX are the original makers so all good.


The master cylinder is weak so if you are having trouble engaging gears that's most likely the problem. However you'll need to change master AND slave as the pipe connector by the LHS front wheel will be corroded solid.


You can change just the slave but master needs a slave as well.



If the clutch is noisy, not following the pedal or feels bouncy then it will need a new clutch.

Thank you guys. I will try that and see how I get on. I’ll post results if I mange to sort it.