-11.jpg

Punto (Mk2/2b) My First Car named Eleanor.

Introduction

My Build Thread

Hey guys i was half way threw 18 when I got my first car. I chose a Fiat Punto 1.2 16V Sporting over a Saxo (y). Cutting a LONG story short i had numerous troubles trying to get this car,Colour,Sporting,6 Speed gear box etc etc. First time on Auto Trader lady was veyr nice was going down to see her on the Saturday. Phoned her up again on the Saturday to let her know In was going down with my dad just after lunch "ohh... im sorry to tell you I sold the car last night" me -> :bang:. So after a other 4weeks waiting a other sporting appear :slayer:. This time was in a car lot so bound to get it. Problem was though it was 400miles away. But my dad said we would travel as I was :mad: about the last time. So phoned the garage up atleast 4 times on the way down. Got there at 4:30. I began looking around for my punto.......... "thats funny i can see a fiat Punto??" So spoke to the manager guy. "Hi im looking for a fiat Punto MK2 Sporting in grey?" "Oh sorry m8 i sold the car at around 4:00. that Point I nearly punched the guy. The guy i was on the phone with had finish his shift at 3:30 and didnt tell his boss we were coming down!! so basically we drove 400miles for a bag of chips. Like the film Gone In 60 Seconds trying to get the GT500 somthing ALWAYS happens.

Three weeks later!. Phoned a guy in Auto Trader and told him i was coming down in the morning. I explained to him the trouble i went threw and he said he would keep the car for me. Picked the car up from the guy I had this face the whole way home -> :D.

THE MODS!!!!!! :slayer:
Believe it or not I already had a picture in myhead exactly how i wanted it too look. Gave me things to think about while trying to get the car. Im studying AutoMotive Refinishing at College. Which is panel beating and spraying. Following that course will be doing a busines course. So i knew i was allowed to work on my car for free/ GET PAID FOR IT :D LOL!.

Few pictures of the car when I bought it paid £1500
Car came with
4 New TOYO T1 ties
Full new Exhasut
12months Road Tax
12Months MOT
New Brake and Brake pads
around 65k on the clock

1245.jpg


2148.jpg


1245.jpg



After a week of getting use to the car. Time to get the picture in my head onto the car. I began working smoothing out the front bumper. P40 was used to fill the bumper with Bodyfiller and Top Stop applied to finish off. I hacked sawed out the front bumper struts to create a giant mouth.

5a.jpg


644.jpg


733.jpg


831.jpg


927.jpg


1038.jpg


Final photo of the front bumper smoothed and bonnet de-badged. Number plate was also moved down to the bottom for a while. Just wanted to complete change the look of the car.

-11.jpg


After around 2 weeks I began on the audio Full vibe install, Flip out DVD player hooked up to the PS2 little bit of Need For speed during lunch ;). Then i was told by my GF and parents to calm down on the spending LOL. so did FOR like a WEEK!. Blue footwell Neon gave the car a nice look during the night. Set of AutoGuage guages filled the A-Piller

-12.jpg


1327.jpg


I had a wee break from modding due to college exams and extra shifts at work (n). But wait...Extra shifts?? More MONEY to spend on the car!! :slayer:. Decide the stupid arial! had to go :D smoothed that off. On the way hoime from college a BMW went past me and i seen its black roof. My brain then clicked :D BLACK ROOF!!. I bought the vinyl of ebay at £60 and got a local guy to fit the vinyl for me.
How the car is looking at the current time

-14.jpg


New alloys will be arriving soon. The auto Guage piller pods are away now though shown in the above pic. Also recently bought a HGT center console. So you can probs guess where the guages are going ;).

Comments and suggestions are all welcome
Re: My First Car named Eleanor

love the back bumper,very neatly executed,dont normally like the smooth look but the outlet on the exhaust just makes it look just so:)
 
Bad News.... :(

Well 30mm springs arrived today, Pritty pleased. Got them on really easy with my new air gun. Drop the car 20mm extra clearance woop! took it around my block first speed bump...SCRAP!! AHHH!!! back in the drive rear wheels off. Front is perfect. Decided to fold the inner rear arch in. Got started with a hammer and a rubber dolly on the outside worked Perfect!. Test around again. Didnt rub once. My dad got in the passenger seat, Rubbed, SO now ive got to get the rear alloys center bored bored out so i can get rid of the 5mm spacer on the backs that make the alloy fit on the rear hub, Hopefully this is going to sort the scrubbing issue on the back.


Fingers Crossed.

Loving the new alloys though, Once done i think im going to be really pleased
 
Mini update/ BBS New Idea

Well i cant sort my BBS until i stop them rubbing. Decide to purchase a set of Spring assisters/. Used when towing to stop the spring from fully compressing. Im hoping this going to do the trick. Me driving the car is perfect. But soon as i add a passenger SCRUB! when on speedbumps. and thats just a 30mm drop :( on the rear

Any here is the little update. Rewired the SMD to these Blue/Red/white
1274.jpg



Here is a link to the Spring Assisters
Ebay item number - 260625065432
Think these will work! :bang:
 
Last edited by a moderator:
Re: Mini update/ BBS New Idea

Well i cant sort my BBS until i stop them rubbing. Decide to purchase a set of Spring assisters/. Used when towing to stop the spring from fully compressing. Im hoping this going to do the trick. Me driving the car is perfect. But soon as i add a passenger SCRUB! when on speedbumps. and thats just a 30mm drop :( on the rear

Any here is the little update. Rewired the SMD to these Blue/Red/white
1274.jpg



Here is a link to the Spring Assisters
Ebay item number - 260625065432
Think these will work! :bang:

Looks really good, im hoping to do the same thing at some point but if possible have the needles white.
 
Last edited by a moderator:
Re: Mini update/ BBS New Idea

Snag is when you hit a larger hump in the road (like a small bridge) at speed the suspension will compress and tyres will hit paint/metal. It will look a bit naff until bodywork done but putting the old wheels back on the back would be a better bet
 
Re: Mini update/ BBS New Idea

Nice Punto you got their mate,

Whats the best way to change the colours on my speedo etc? Is it a bulb change or wiring?

Sorry, bit of a noob!

Cheers

John
Well i cant sort my BBS until i stop them rubbing. Decide to purchase a set of Spring assisters/. Used when towing to stop the spring from fully compressing. Im hoping this going to do the trick. Me driving the car is perfect. But soon as i add a passenger SCRUB! when on speedbumps. and thats just a 30mm drop :( on the rear

Any here is the little update. Rewired the SMD to these Blue/Red/white
1274.jpg



Here is a link to the Spring Assisters
Ebay item number - 260625065432
Think these will work! :bang:
 
Last edited by a moderator:
Re: Mini update/ BBS New Idea

Nice Punto you got their mate,

Whats the best way to change the colours on my speedo etc? Is it a bulb change or wiring?

Sorry, bit of a noob!

Cheers

John

you have to strip the speedo clustor to get to the circuit board behind...then desolder the old LED's of it and solder new ones takes a bit of practise and a steady hand as the LED's are very tiny lol(y)
 
Re: Mini update/ BBS New Idea

you have to strip the speedo clustor to get to the circuit board behind...then desolder the old LED's of it and solder new ones takes a bit of practise and a steady hand as the LED's are very tiny lol(y)

needs good eyes too;)
 
Re: My First Car named Eleanor

Nice looking BBS rims, would be better being .5 inches wider and having a little tuck under the arches, more camber and slightly lower profile rubber.

Car is getting along nicely, I always miss this as it's not in members motors :(
 
Photo time!!

Well ive got the BBS on. Massive improvment how she looks. Really wide at the back. Front is pritty wide also. Tried a 5mm spacer on the front but scrubbed at full lock. Rear passengers... thats a no!. Scrub with just my little brother sitting in the back seat with his friend. Was at the cinema last night and took a few snaps while in the underground car park.

What u guys think?

Should all this thread really be in Members Motors???? :confused:
1275.jpg


2162.jpg
 
Last edited by a moderator:
Re: My First Car named Eleanor

if you cant have rear passengers then definately strip it mate,loose a bit of weight,also you could just get alfa 147 seats for the fronts there about 45 pound each on ebay and fit straight on the fronts,would look well nice mate ;)
 
Back
Top