Stilo How to fit sideskirts to your Stilo!

Author Ben R
Publish date May 31, 2005
Updated Mar 18, 2009
Article read time 2 min read

Guide Gallery Discussion

Doing the other side

[/LEFT]
Repeat the process on the other side of the car. Be warned this job takes a long time so patience is the key & take your time.

Thanks to Mike for letting me use his car as a guineapig!

View attachment 13127

View attachment 13128

View attachment 13129

View attachment 13130

: Previous page: Final steps

Share:

Facebook X (Twitter) Reddit Pinterest Tumblr WhatsApp Email Link

Table of contents

Overview Jacking the car up First steps Attaching the skirt Final steps Doing the other side View full guide

Guide information

Author: Ben R

Views: 45,723

Last update: Mar 18, 2009

Join the discussion

More in FIAT Cars

Panda 2012+ Cleaning the VVT solenoid actuator 1.2
Poor power? VVT actuator is reponsible for altering the valve timing. It has a number of mesh...
A

500X 1.4L multiair alternator clutch pulley replacement without removing alternator
There is a good video to explain how the pulley works, but he shows a reverse thread. In the...
500 (Classic) Fitting front seatbelts to a 1968 Fiat 500L
My 1968 Fiat 500L never had seatbelts. It is sooo weird driving a vehicle w/o seatbelts (even...
Grande Punto LeftHandDrive, the OBD2 port location change.
LHD (left hand drive) Grande has a problem with OBD2 port access (especially during extensive...
V

Panda 2012+ Number Plate Lamp
The basics of accessing the bulb in a Hatch mounted Panda lamp Turn on lights to see which need...

More from Ben R

B

Stilo How to fit a front upper strut brace!
Tools you will need. 1. 3mm drill 2. 4.5mm drill 3. 5.5mm drill 4. Small tube of copper grease...
B

Stilo How to fit a BMC carbon dynamic airbox to your Stilo!
Tools you will need: 1 1/4" ratchet & 10mm socket & a long extension bar 1 stubby phillips screw...
B

Stilo How to paint brake calipers.
Tools you will need 1 torque wrench 1 17mm deep socket 1 extension for socket (if required) 1...
B

Stilo How to fit a rear spoiler to your stilo!
Tools you will need: 1. a long 3mm drill bit & drill. 2. 1 6-6.5mm drill bit 3. 1 caulking...
B

Stilo How to Fit/Remove your grille
Removing the FIAT Stilo Grille Tools you will need: T30 Torx Driver Small pry bar or flat...

Share this article page

Facebook X (Twitter) Reddit Pinterest Tumblr WhatsApp Email Link

Copy URL BB code

Copy AMS BB code

Top