Stilo How to change the 1.6 Timing belt

I'm not gonna go on too much about the rebuild as anyone that has come this far is more than capable of doing it without any more guidance.

just one thing i really need to add is the aux belts need to go on AFTER the covers and engine side mount has been re attached.
The bolts for the aux belt are 15mm, loosen the bolts off (two of them before it will move) put on the new belt then tighten the belt like this-


The compressor belt is a bit more of a pig, its a stretchy belt so get it around the crank and then over the top of the compressor pulley, using the crank bolt turn the engine by hand until the belt is completely on.