Hi, Bit of advice needed

Ive got 15mm spacers and never got round to actually fitting them until yesterday but realised as ive got rear drums, the hub is too long:

and the spacer wont go close enough to the wheel

anyone know how they can be fitted?

thanks

Is they are hubcentric spacers then they should fit right against the drum and the wheel would fit on the spacer?!
Ive had spacers on a few cars with rear drums and had no issues.
What make are they and are you sure you have the right diameter?

Yeah they're delta mics hub centrics, fit the front fine as the hub is 15mm so fits straight over, but the rear hub is too long

You have to knock the metal cap/cover off that hides the nut, then it should fit straight on, what size spacers u running on the front?

Cheers mate, how do i knock it off? and will taking it off cause problems to the bearing or anything?
i dont at the minute, just put the 15's on to see if theyd fit

Loocas is right, you have to smash the bearing cover off, I used a hammer!!!!! and crowbar..you can if you want just brute force tighten them on and they squish on, does get hard though!

Ah awesome, where's the best place to hit them? any tips before I take a hammer to my car