Hello FiatForum,

I'm new here because I want to add some stuff to my 2016 Fiat Doblo, I wanted to rewire the rear door lock button to a new button near the hand brake, does anyone have good advise in succeeding this task?

Some time in the near future I also want to finish my extra battery in the back with a Victron inverter. with this I want to add an inlet and outlet with PowerCON True1 connectors to the outside of the car. Does anyone have any advise on that too?

Thanks in advance,
Dylan

You can get after market buttons on ebay for most things, so relocating a button may just need some wires from the current button and fit the new one where you want it.

A second battery will require a split charge relay, if you want to run a big inverter then you will want a good quality relay.
If you want to install connectors the you'll having to be brave and cut a hole in the van, just be careful of running mains power through a hole in a metal van you don't want any shorts to the body and you want to make sure its all safe and isolated when not in use.

What are you planning to use this for.