I have a few servicing jobs to carry out on my Seicento sporting.

1. Change coolant, Where is the best place to drain it from and where are the bleed bolts?

2. Change rocker cover gasket, What torque should the bolts be, Is there anything else i should know about changing it?

3. Change fuel filter, Where is it?

The rest i should be sble to sort out. Thanks in advance Ben.

Note: This is for an 899cc Sei, but most of this could be the same on a Sporting.

1. You can drain it at the bottom of the radiator (at the front, and on the left of the radiator). Read the workshop manual for the best procedure for this. One bleed valve is at the back of the engine bay near the middle, just hanging down. The other is to the left infront of the coolant tank IIRC.

2. I don't know, but it's probably in the workshop manual. Make sure it's not too tight or too loose, otherwise it'll leak again

3. Below the petrol filler cap. Stick your head under the car where the petrol filler cap is, and look slightly to the right (or the left if you're laying on your back).

fuel filter is in the middle of the car?

spot on with the coolant drain and dont do the rocker too tight or your bolt will snap (trust me )

I have not got the workshop manual thats why im asking the stupid questions.

haynes manual for the cinq sporting says the torque settings for the Camshaft cover are 8 newtons or 6 foot pounds


Em

What is the fluid capacity of the coolant system?