Hi,can some one tell me where to find the plug to read fault codes on my fiat brava 1.6sx 2000 X reg.in the manual it states that it is next to the fuse box under the bonnet but its not there.i m i looking for a 16 or 3 pin connector.can some one help mme locate the plug in.thanx Brian

i'm going assume its a 16pin as its after 2000
So you'll be OBD2

As for the Plug itself - if its like its brother the punto - its in the Internal Fuse Box

Ziggy

Hi looked in the fuse box and cant see where to plug it in,i got a R A C Fault code reader with 16 plug adaptor.is the 16 pin connected to anything in the car and i got to disconnect it to connect my code reader or will it be on its own.i cant match up the adaptor with anything in the fuse box .can it be somewhere in the car do you know.

I found this but can't remember where.

Under the drivers side fuse box, there should be like felt sound proofing, move along to the bonnet release catch and there should be some felt cut out and through there is the ODB port.

But I think its the old 3 pin type, not OBD2.

Thanx Mate found it . the fault code is P0351 which is the ignition coil A primary/secondary circuit malfunction.can you tell me what i must do to solve this as i dont know muck about cars in general.

These are the easiest to use or the similar adaptors which are fully coloured.

http://www.ebay.co.uk/itm/ALFA-FIAT...s_Equipment&hash=item3a67c635dd#ht_1131wt_922

Re: fiat brava Fault Code P0351

Hi there,fault code P0351 ignition coil A primary/secondary circuit malfunction.change plugs and new coil leads but still happening.can someone tell me what the fault code mean,does the bad signal come from the coil itself or does it comes from somewhere else, etc ECU maybe.please HELP