You have the unit ending with 98. Same as mine and not able to reset with fiatecuscan.
But you can if you do the next:
first get an obd2 cable
http://www.ebay.com/itm/18116860654...arts&cmd=ViewItem&hash=item2a2e7d8d53&vxp=mtr
this is selectable so you can read abs and engine with fiatecuscan
than you need:
http://www.ebay.com/itm/16PIN-OBD2-...820?pt=LH_DefaultDomain_0&hash=item4174a31fdc
Then install all drivers included with the obd2 cable.
install fiatecuscan to read out engine and abs
To reset airbag please read (google translated)
- Download the zip file from the following link:
http://www.peter-feil.eu/~peter/obd/trw2scan/
- Unzip the file to a directory in the root of the C drive, eg c: \ trw2scan
- Connect the USB connector of the KKL / OBDII connector to the computer
- Close the 16pins connector of the 3pin adapter to the OBD connector
- Connect the 3 pin connector to the airbag connector. This is in a dummy plug on the fan in the foot well of the passenger seat
- Connect the red wire of the 3 pin adapter cable to 12V (battery)
- Put the key in the ignition and turn (so the engine does not start) it to the first position
- You now have two options, use the command prompt or Windows Explorer.
Command Prompt
- Open the command box (W7 and W8 type cmd, then enter)
- Type: cd ..
- Repeat this until you are in the root of the C drive
- Type: cd trw2scan and gives enter (if you received the program in a different directory ge-unzip you choose that directory)
- Type: trw2scan trw2.obd and press enter
Windows Explorer
- Browse to the directory where the program is (C: \ trw2scan in the example)
- Right click on trw2.obd
- Choose OPEN
- Choose CHOOSE A PROGRAM INSTALLED (text could be something else, I an English Windows version) Choose OK
- Choose BROWSE
- Now browse to the program directory and choose the program trw2scan.exe
The program is now run in the DOS box. It makes contact with the airbag ECU and gives an overview of the error messages.
Finally it proposes a query that looks something like this:
reset faults y / n
- Now key y
The errors are reset and the DOS box terminates automatically. I had to run the program twice but then the light on my dashboard was out
Success!