my tyre warning light has come on, i have checked and adjusted the tyre pressure correctly but the light on the dash is still there why, how do i reset it according to the manual it reads carry out the reset procedure but now where can i find in the manual how to do it can anybody help me please.

I am only saying this from memory so totally open to correction, but I think there are 6 buttons on the right of the dash, I think one on the bottom row has a picture of a tyre profile (it may even say reset I can't remember).


I think you just press and hold for a few seconds, but like I say, that is just from memory so could be wrong.

I have yet to take delivery of my new Tipo, but when I test drove the demonstrator, like stromonoff says, I seem to remember seeing a Tyre Pressure reset button down below the right hand stalk on the dashboard (just above where your right knee is while driving). It was in the same location on my Punto Easy+.

Not having my Tipo yet, I'm not sure of the exact process but normally, if all the tyre pressures are correct then it should just be a case of pushing the button with the ignition on/engine running until you hear an audible beep. It'll either reset the system, or may put a message up in the dash display for you to confirm the reset. That should reset the system but if it wont reset or comes back on then there is either a fault or you have a puncture.

As I say, I'm yet to take delivery of mine, so I stand to be corrected but I am sure that JTD_Liam or someone else who already has a Tipo will be able to either confirm or correct what I have said.

As others said, check pressures are correct then with ignition on and car stationary press and hold the tyre pressure reset button above your right knee until the car beeps.