Technical x244 wiring diagram

[mon4x4]

Hi guys, recently purchased an x244 camper and temp guage not working. Changed sensor but still no! Earthed out sensor wires and the warning light works but not th gauge, can anyone tell me what colour wire into guage is or point me in the direction of a wiring diagram please? Also tried the 10min reset with no joy.
Thanks

 

[Communicator]

Hi guys, recently purchased an x244 camper and temp guage not working. Changed sensor but still no! Earthed out sensor wires and the warning light works but not th gauge, can anyone tell me what colour wire into guage is or point me in the direction of a wiring diagram please? Also tried the 10min reset with no joy.
Thanks

You do have not provided the engine details. It may not matter in this context, and I will assume 2.8jtd as that is what I have. The wire is marked "BM" on the diagram, which translates to White/Brown.

 

[mon4x4]

You do have not provided the engine details. It may not matter in this context, and I will assume 2.8jtd as that is what I have. The wire is marked "BM" on the diagram, which translates to White/Brown.

Thanks for the diagram but it doesnt match the colours on the sensor. My wires are Brown/Green for the guage and Pink/White for the warning light but cant find these colours going in to the instrument cluster

 

[Communicator]

Thanks for the diagram but it doesnt match the colours on the sensor. My wires are Brown/Green for the guage and Pink/White for the warning light but cant find these colours going in to the instrument cluster

It has been stated on forum that Fiat do not always stick to diagram colours, but I have not experieced this myself.
The sensor is shown as being connected via instrument panel connector A pole 9. (E050A/9). Details of E050A may be viewed here.

 

[mon4x4]

It has been stated on forum that Fiat do not always stick to diagram colours, but I have not experieced this myself.
The sensor is shown as being connected via instrument panel connector A pole 9. (E050A/9). Details of E050A may be vThank

Thank you, will have a look later.

 

[diego74]

If you earthed the cables and the dash noticed it by turning the warning light on then most likely the motor of the temp gauge needle is not working.