Technical Wrong darned mirror...

Currently reading:
Technical Wrong darned mirror...

I thought that I'd replace the offside folding mirror on my Multi.

I got a new one, but it's wrong (cannot return it)

It is a power-fold & heated, but it only has 7 pins, the old one has 9.

Old mirror:

#735266578

wire colour (L to R)

lilac
lilac
brown/black
red/lilac
red
turquoise
yellow
white
black


New mirror

#735282487

Just the same coloured wire arrangement, but it lacks the two lilac wires.


I'm thinking of making the connection anyway (cut & solder) because pins 3 - 9 seem the same.

What do the two lilac wires do? Does anyone have a wiring diagram?
 
7 wire mirrors are for cars without climate AFAIK. The extra two wires in the 9 wire version goes to the external temperature sensor. Has the new one you bought got the sensor 'bobble' on lower left corner of the housing?
 
Multi's with an AUTOMATIC a/c have the meter i think, i haven't seen a Multi with a manual a/c with the meter yet.
 
I have manual A/C and an outside temp readout.

Could be for the mirror heater.
 
If it's not the original mirror (i.e. not the one it left the factory with), then it's possible someone replaced it with whatever came to hand.

If you haven't got climate control then you shouldn't need the 9-wire mirror. As a matter of interest, does the old one have the little bobble on?

I reckon the main loom would probably have all wires in place, even if the car hasn't got climate. I doubt they (Fiat) would want the hassle of managing different main looms.
 
Back
Top