Technical workshop manual for 2007> Ducato

[berni109]

followed these instructions to the letter and i got a working copy with english using the download available from this site.

(previously tried and could only get italian to work for whatever reason).

Thanks very much to whoever went to the trouble to set this up.
Bern

 

[K13ehr]

ok go to the web page link below
right click on the blue box that says 'click here to start download from sendspace'
left click on the drop down menu that says 'save link as'
then click save
may take 20 minutes or so to download

web page link: sendspace.com/file/a74q6x
had to delete the web stuff due to not having posted 5 times yet

That will give you a 206MB ZIP File
Unzip the file to a new folder
Burn the CONTENTS of the new folder on to a CD
Take the CD out, re insert it, and the workshop manual should install
This is a full workshop manual for the X2/50 (Ducato 2006 on), engine out, stripdown etc.

I've followed the instructions above to the letter, and got an empty CD, so I think possibly there is something wrong with the download, file, I say this because, when I try to burn it to the CD after extracting the Zip to it's own folder, I get PDF directory exists do you want to overwrite it, copy or replace, same for the Database folder, so not sure what is going on CD/dvd write is working fine, Laptop has no issues, virus checked it within an inch of it life.


CD shows 653mb free out of 653mb


Help please before I need a new laptop and window.

 

[HECTORSHOUSE]

Hi
Is there a workshop manual for the Selespeed transmission fitted to the X250 Ducato ?

 

[K13ehr]

Anybody home????

 

[pete4x4]

I've just downloaded the 7 parts to the same folder and with WINRAR extracted the ISO and burnt it to a disc. No issues
On first running with cd in it does come up in Italian that is the default but from the drop down box you can select English and then everything is fine.
Thanks for the resource.

 

[Robbityrob]

Hi.

I have just battled with this and windows 10 and succeeded so I thought I would add how I did it. First I burnt all the files to an .iso using infrarecorder. Then I left this .iso file (I called it x250.iso) on my harddrive and mounted it (right click on the file and "mount" should be at the top). Now windows 10 thinks this is a CD, which I then ran the installer from (setup.exe I think). Then I can just go to this virtual CD from explorer and click "start.exe" to run the program. The advantage of this way is I don´t need to look for the CD everytime I want to look at the service manual.

Also, if the program starts crashing and then makes double menus (where it says everything twice) try finding the program file (e.g. C:\Program Files (x86)\eLearn) and right click, go to compatibility mode then run as windows XP. Seems to work better that way in windows 10, but your mileage may vary.

Also, don´t make the same mistake I did, which was to make several virtual CDs whilst attempting to install, as I think you can only run from the same cd drive letter e.g. F:/ as from where you installed it. So if you make a mistake, delete and uninstall everything from elearn and start again, only takes a couple of minutes. I even went so far as to delete the copies in my \virtualstore folder, but this may have been overkill.

 

[fish4272]

Hi, I am sorry for refreshing this thread, but looks like it suits my problem.
I have Fiat Ducato 35 Maxi 120M-J LWB, 2007 year
Someone measured my van recently, and said it has 6,35m. As far as I remember it has 5,99m
This wrong measurement causing me lots of troubles at my work now. Can someone provide the manual which include specification of Fiat Ducato 35 Maxi 120M-J LWB from 2007 please? I need just the proof of the entire length of the car.
I would be very grateful.
Thank you in advance

 

[corcai]

Try enter you VIN here: http://aftersales.fiat.com/elum/

 

[chris3234]

Do you have a towbar or anything else added to the van?
As that would explain the extra length

 

[RS3100]

Drop a plumb line from front and back, chalk the ground and measure between the marks.

The 6.35m vans are easily distinguishable from the 5.99m versions, as they have an obviously longer rear overhang behind the rear axle. The longer van normally has orange side marker lights in the side rubbing strip panels between the axles and in the side rear bumper panels too.

 

[HughJampton]

You only need one measurement, that from the centre of the rear wheel to the rear extremity. (the wheelbase being the same on the 5.998m L version and 6.363m XL version).

It is 1015mm on the former, and 1380mm on the latter, easy to measure and different enough to allow for a margin of error and still be obvious.