right guys how hard is it to change these as need new ball joints on front so just going to change whole wishbone as i dnt think u can buy ball joints seperate
I changed mine on my 2.4jtd weekend, wasn't too much of a hardship.
I undone the ball joint bolt, hit old wishbone down with a hammer to get the ball joint out, unbolted the 2x bushes (4 bolts) attached to the car and ripped her out
putting the new one in was easy but obviously tyring not to use the hammer too much on the new one.
I personally found this easier than trying to get the bottom ball joint in and out of the wishbone.
cost me about £30 per-side for the wishbones.
Darren
edit* i think i may have undone my dropink as to make it easier to move the strut back and forth too.