hi guys,i recently purchased a remote alarm from ebay (after a mate beat me to it buying a meta m20 off a friend) the alarm i got is this:
http://rover.ebay.com/rover/0/e1105...em=400154858065&ssPageName=ADME:X:AAQ:GB:1123
the guy has sent me diagrams for a 3 door bravo with c/l BUT its for a L/H drive vehicle and it doesnt mean anything to me lol This is what he sent:
*+12v on the block for ignition, orange wire.
Buttons doors:
on the button, wire WHITE / RED.
Trunk button:
Connector on the tailgate, red / black wire.
Hood button: To be added.
Direction indicators;
Under the dash in the fuse box (left hand drive), the connector H pin and a blue wire
Pin 6 wire BLUE / BLACK.
Power outages
50 (starter): The ignition block, red / black wire.
FUEL PUMP (gasoline):
Under the dash in the fuse box (left hand drive), and the connector, pin 5 wire
BROWN / WHITE.
Odometer
In the engine compartment behind the battery connector GREY / GREEN 20-pin PIN No 5, wire
GREY / RED, or, in some cases, under the dash behind the instrument panel in
BLACK 20-pin connector, PIN No 13, wire GREY / BROWN.
Central locking;
in the output connectors of the front doors, or unit (contacts 2 and 3), positioned
behind the bulkhead behind the passenger side glove box blue and white wires.
Track wiring diagram for negative controls*
i can get a mate to do it for me at a cost of £50 and he said he will include the motor for the boot to work and also a 2 way wire solenoid if my car hasnt got one.
I would like to try and attempt it myself in all fairness so if anyone can help then apreciated.
Thanks
Mike![Thumbs up (y) (y)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
http://rover.ebay.com/rover/0/e1105...em=400154858065&ssPageName=ADME:X:AAQ:GB:1123
the guy has sent me diagrams for a 3 door bravo with c/l BUT its for a L/H drive vehicle and it doesnt mean anything to me lol This is what he sent:
*+12v on the block for ignition, orange wire.
Buttons doors:
on the button, wire WHITE / RED.
Trunk button:
Connector on the tailgate, red / black wire.
Hood button: To be added.
Direction indicators;
Under the dash in the fuse box (left hand drive), the connector H pin and a blue wire
Pin 6 wire BLUE / BLACK.
Power outages
50 (starter): The ignition block, red / black wire.
FUEL PUMP (gasoline):
Under the dash in the fuse box (left hand drive), and the connector, pin 5 wire
BROWN / WHITE.
Odometer
In the engine compartment behind the battery connector GREY / GREEN 20-pin PIN No 5, wire
GREY / RED, or, in some cases, under the dash behind the instrument panel in
BLACK 20-pin connector, PIN No 13, wire GREY / BROWN.
Central locking;
in the output connectors of the front doors, or unit (contacts 2 and 3), positioned
behind the bulkhead behind the passenger side glove box blue and white wires.
Track wiring diagram for negative controls*
i can get a mate to do it for me at a cost of £50 and he said he will include the motor for the boot to work and also a 2 way wire solenoid if my car hasnt got one.
I would like to try and attempt it myself in all fairness so if anyone can help then apreciated.
Thanks
Mike
This post contains affiliate links which may earn a commission at no additional cost to you.